كاميرا فوجي فيلم إنستاكس ميني إيفو الهجينة الفورية - بني

Specifications:

Camera Function

• Image sensor: 1/5-inch CMOS with primary color filter
• Number of recorded pixels: 2560 x 1920
• Storage media: Internal memory, microSD/microSDHC memory card
• Storage capacity: Approximately 45 images in internal memory, approximately 850 images per 1 GB in microSD/microSDHC memory card
• Recording method: DCF compliant Exif Ver 2.3
• Focus distance: f = 28 mm (35-mm film equivalent)
• Aperture: F2.0
• Auto focus: Single AF (with AF Illuminator)
• Shooting distance: 10 cm to ∞
• Shutter speed: 1/4 second to 1/8000 second (automatic switching)
• Shooting sensitivity: ISO100 to 1600 (automatic switching)
• Exposure control: Program AE
• Exposure compensation: −2.0 EV to +2.0 EV (1/3 EV step)
• Metering method: TTL 256 split metering, multi metering
• White balance: Auto, Fine, Shade, Fluorescent 1, Fluorescent 2, Fluorescent 3, Incandescent
• Flash: Auto flash / Forced flash / Suppressed flash / Shooting range with flash: Approximately: 50 cm to 1.5 m
• Self-timer: Approximately 2 seconds / approximately 10 seconds
• Image effects: 10 lens effects, 10 film effects / Total of 100 effects by multiplying above

Print Function:

• Exposure Print pixel count: 1600 x 600 dots (800 x 600 dots when printed from smartphone app)
• Exposure resolution: 25 dots / mm x 12.5 dots/ mm (635 x 318 dpi, 40 x 80 μm dot pitch) / 12.5 dots / mm when printed from smartphone app (318 dpi, 80 μm dot pitch)
• Interface: Standard compliance: Bluetooth Ver. 4.2 (BLE)
• Exposure gradation: RGB gradation of 256 colors
• Printable image format: JPEG images taken with this unit
• Print output time: Approximately 16 seconds * Plus 7 seconds when printed using instax-Rich Mode immediately after startup.
• Print function: Images in the internal memory and images in the memory card can be printed
• Reprint: Reprint is possible for images stored in print history (up to 50)

Other

• Smartphone app linked functions: Smartphone image print function, remote shooting function, printed image transfer function, firmware upgrade function
• LCD screen: 3.0-inch TFT color LCD screen / Pixel count: Approximately 460,000 dots
• External interface: Micro USB Micro-B (for charging only)
• Power supply: Lithium ion battery (internal type: not removable)
• Charging function: Built-in
• Possible number of printed images: Approximately 100 (from full charge) * The number of prints depends on the usage conditions.
• Charging time Approximately 2 to 3 hours * Charging time depends on the temperature.
• Main unit dimensions: 87 mm x 122.9 mm x 36 mm (excluding projecting parts)
• Main unit weight: Approximately 285 g
• Operating environment: Temperature: 5℃ to 40℃ / Humidity: 20% to 80% (no condensation)
• Film used: FUJIFILM instant film "instax mini"